The effect of temperature and strain rate on elongation to failure in nanostructured Al-0.2wt% Zr alloy fabricated by ARB process

The effect of temperature and strain rate on elongation to failure in nanostructured Al-0.2wt% Zr alloy fabricated by ARB process

Blog Article

A nano/ultra-fine grain Al-0.2wt% Zr alloy was produced by accumulated roll bonding (ARB) processafter 10 cycles.The fraction of high angle grain boundaries increased from 8% to 65.

4% during 10passes during ARB process.This alloy was subjected to tensile test at different temperatures (523,573and 623 K) and strain rates (0.1 and 0.

01 s-1).The optimum condition of temperature and strain gtech brush bar rate of623k and 0.01s-1 was achieved for maximum elongation to failure, leading to 100% elongation,although maximum elongation was achieved at higher strain rate and maximum chosen temperature.

In fracture surfaces after the test, dimples in higher crafthouse by fortessa glass smoking box with handheld smoker temperature were deeper, bigger, and longer thanlow temperature.Because of presenting the superplasticity character at elevated temperature andhigher strain rate, there was no evidence of necking after failure.